Published on Digi-Sign, The Certificate Corporation (https://www.digi-sign.com)

Home > Quick-Start Guide

Quick-Start Guide

By Digi-Sign
Created Nov 4 2010 - 21:55
Getting Digi-Access™ Operational Quickly
The following QuickStart guide to implementing Digi-Access™ is for experienced server administrators. There is a complete implementation guide for beginners, if you need more detailed instructions.
Allow 30 Minutes

  1. Generate a Certificate Signing Request [CSR] from the server using these instructions [1]

  2. Once it's created, use the online CSR checker [2] to make sure it's correctly configured

  3. If the CSR checker passes the CSR as beign correctly generated, then go to the Digi-SSL section of your Digi-CA™ Service account and request your Digi-SSL™ certificate

  4. Wait for the Digi-SSL to be be returned to your email address

  5. Use these instructions [3] to install your Digi-SSL™

  6. Then proceed to configure the server to require Digi-Access™ for two factor authentication [2FA] using these instructions [4]

  7. And finally, use the Digi-Access™ section of your Digi-CA™ Service account to issue test Digi-Access certificates

Source URL: https://www.digi-sign.com/digi-access/quick%20start

Links:
[1] https://www.digi-sign.com/support/digi-ssl/generate+csr
[2] https://www.digi-sign.com/order/digi-ssl/internal/csr-check.php
[3] https://www.digi-sign.com/support/digi-ssl/install+certificate/index
[4] https://www.digi-sign.com/support/digi-access/administrator